Export OBJ file from Microstation to PoinTools

Re: Export OBJ file from Microstation to PoinTools

Mathieu St-pierre — Fri, 23 Aug 2013 21:59:04 GMT

Hi Eyal,

I would suggest that you post your question in : communities.bentley.com/.../343228.aspx, which is the forum to use for questions related to Pointools.

Thanks,

Mathieu

Re: Export OBJ file from Microstation to PoinTools

Reginald Wallace — Fri, 23 Aug 2013 19:10:52 GMT

ObjExporter is based on ModelFacetter, faceting is a 3d concept. This means that only surface an solid elemets can be exported. This why your grid lines do not come through as they are 2d.

Re: Export OBJ file from Microstation to PoinTools

eyalz — Thu, 22 Aug 2013 17:40:27 GMT

Here it is :

Microstation model (*.i.dgn) : dl.dropboxusercontent.com/.../TOTAL%20MODEL.i.dgn.zip

You can export the model to OBJ file (It will create a very big file ~230 MB) - then you can upload it to PoinTools and view it - the grid lines and the numbers wont be shown.

Thanks

Re: Export OBJ file from Microstation to PoinTools

Reginald Wallace — Wed, 21 Aug 2013 19:14:19 GMT

Can you provide the files or if the files are large a link where the files can be downloaded?