Export OBJ file from Microstation to PoinTools

Question

Hi, 
 In order to import a model I made in Microstation to Bentley PoinTools ,I exported the file to OBJ format (The only format PoinTools can read from Microstation- to the best of my knowledge). 
 The model was exported fine but without the grid lines (see picture 1 - from Microstation) : 
 
 see Picture 2 - the OBJ file on PoinTools : 
 
 As you can see - I cannot see the numbers of the grids and also the grid lines. 
 Maybe you know why this happens ? 
 Can you suggest another format I can use that PoinTools can read ? (ans I can use Microstation to export to it) 
 
 Thanks, 
 
 Eyal

Reginald Wallace · Accepted Answer

ObjExporter is based on ModelFacetter, faceting is a 3d concept. This means that only surface an solid elemets can be exported. This why your grid lines do not come through as they are 2d.

Mathieu St-pierre · Answer

Hi Eyal, 
 I would suggest that you post your question in : communities.bentley.com/.../343228.aspx , which is the forum to use for questions related to Pointools. 
 Thanks, 
 Mathieu