Converting an a-cad file to v8i

RE: Converting an a-cad file to v8i

owens_2k — Tue, 17 Dec 2013 08:35:15 GMT

I am trying to save a dwg to dgn while mapping the linestyles. I have created a CSV file and populated the Linestyles tab however the "apply line style mapping" tickbox is still greyed out.

Does anyone know why?

Re: Converting an a-cad file to v8i

chris — Thu, 17 Oct 2013 17:58:14 GMT

Darius,

thanks for your help. now the fun begins populating the fields.

chris

Re: Converting an a-cad file to v8i

Darius Rimasauskas — Thu, 17 Oct 2013 10:10:56 GMT

I see you have imported Levels, Line Styles (guess using the button in worksheet). You should be able to do the same with Fonts:

For the Colors, Weights you need manually add values in 'Color', 'Weight' columns and set to what value you will remap at 'V8OutputWeight':

After those two steps, saving excel file, you should see at same place the *.csv file that needs to be loaded in Save As V8 Options:

In order to see the 'Level Mapping', 'Line Style Mapping', 'Color Mapping' fields active you must add the values at 'V8Output...' columns in required worksheets.

I have attached xls and csv files with some modifications done.

Hope it helps.

Re: Converting an a-cad file to v8i

chris — Wed, 16 Oct 2013 17:53:13 GMT

good morning darius,

thanks for offering to look at the file. attached is the excel spread sheet.

Re: Converting an a-cad file to v8i

Darius Rimasauskas — Wed, 16 Oct 2013 10:09:56 GMT

Chris, you mean was able to import 'Levels' and 'Line Styles' by selecting the icon/button in execl worksheet (that icon is not in other worsheets) or manually added those lines?

Have you read instructions in each worksheet and the instructions worksheet? let say remaping Cell with CSV is only saving to DGN V7 file format.

Maybe older way writing remap table would be easier. Following old wiki article: communities.bentley.com/.../csv-files-remapping-your-data.aspx

and maybe this: communities.bentley.com/.../2952.aspx

You may attach your created *.csv file so we could review it. I have just tested creating new *.csv and all works.

Regards,

Darius

Re: Converting an a-cad file to v8i

chris — Tue, 15 Oct 2013 19:13:03 GMT

Darius,

thanks, I was able to get the levels and line styles to come up on the excel spread sheet, but not the colors weights, fonts or cells. although none of the boxes were able to be checked. I read the two links you attached they were a help. any guess on why the other information didn't come in..

Re: Converting an a-cad file to v8i

Darius Rimasauskas — Tue, 15 Oct 2013 10:32:31 GMT

Have you loaded *.csv file and have you added required Levels/Layers for remapping in this csv file? If you haven't, that is why you see 5 fields greyed out (adding levels in csv file for remap - enables first option "Apply Level Mapping"; next fields enables after you add Fonts, Lines styles etc.).

Check the Wiki arctible for power of CSV file: communities.bentley.com/.../the-power-of-csv.aspx

and this blog: communities.bentley.com/.../import-export-and-remap-of-levels-using-csv-files.aspx

This should explain you how to edit CSV file.

Hope it helps.

Regards,

Darius

Re: Converting an a-cad file to v8i

chris — Mon, 14 Oct 2013 20:36:28 GMT

frank when I go to do my save as the (save as v8 options) the 5 fields under the CSV file are greyed out and can't be clicked on. any ideas

Re: Converting an a-cad file to v8i

chris — Mon, 14 Oct 2013 17:49:49 GMT

thanks frank our end user is a DOT who still uses 63 levels

Re: Converting an a-cad file to v8i

Frank Klein — Mon, 14 Oct 2013 11:17:00 GMT

What kind of cad-files?

LAYERS (DWG terminology) and Levels (Microstation terminology) are the same!

use the SAVE AS(options)/remapping register to see what can be done and how it has to be done!

Re: Converting an a-cad file to v8i

chris — Sun, 13 Oct 2013 23:17:38 GMT

Can I get a sample csv file to emulate. Thanks