Hi all,
My coworker always has a weird display of either dgn or dwg-files (all the files with no exceptions!). See picture below.
Uninstalled his present version and installed the latest version of Bentley View. Problem remains.
Updated display drivers, etc.
When I load this files in Microstation everything looks OK.
What could be wrong?
Hope to see some answers.
Jean Castro
one more thing to check may not be the problem but good work flow... view attributes ( Control B ) turn off construction ..
Lorys
Started msnt work 1990 - Retired Nov 2022 ( oh boy am I old )
But was long time user V8iss10 (8.11.09.919) dabbler CE update 16 (10.16.00.80)
MicroStation user since 1990 Melbourne Australia.click link to PM me
Hi Jean,
what graphics card do you use? If Nvidia, it's probably the issue cased by graphics driver. Search this web for keywords like nvidia driver display or similar and you will find a couple of recent discussion about pretty the same problems (e.g. this one). Especially in the case of Nvidia a rule "the latest version is preferred" is not always correct.
There is also an article how to solve display problems in MicroStation wiki.
It would be helpful to always provide more information about your configuration and also if the problem appeared recently (which means something has to change) or it's long term issue.
With regards,
Jan
Bentley Accredited Developer: iTwin Platform - AssociateLabyrinth Technology | dev.notes() | cad.point