Depth Lock in V8i?

Version 08.11.09.459

I'm experiencing the following issue with a 3D model:

My steel structure is drawn at Z= +53.30m but when I click to draw a line in the elevation, the starting point of the line is at 0.00m and not at the position where I clicked. In the attached image I have highlighted my startng point with a red markup.

I know that depth lock no longer exists in Microstation so could it be a setting within Accudraw?

Can someone point me in the right direction?

Parents
  • ACS Plane Lock is what you would use now instead of Depth Lock. Also, your elements will be place on the plane set by your Active Depth setting. I think you can set up a new ACS to accomplish this also but, I have never done that so I am not sure.

    Microstation CONNECT 10.17.00.209

    ORD CONNECT 2021 R1 10.10.1.3

    Microstation v8i SS 10 08.11.09.919

    Power InRoads v8i 08.11.09.615

    ORD CONNECT 2021 R1 10.10.1.3

    ProjectWise 10.0.3.453

Reply
  • ACS Plane Lock is what you would use now instead of Depth Lock. Also, your elements will be place on the plane set by your Active Depth setting. I think you can set up a new ACS to accomplish this also but, I have never done that so I am not sure.

    Microstation CONNECT 10.17.00.209

    ORD CONNECT 2021 R1 10.10.1.3

    Microstation v8i SS 10 08.11.09.919

    Power InRoads v8i 08.11.09.615

    ORD CONNECT 2021 R1 10.10.1.3

    ProjectWise 10.0.3.453

Children
No Data