I would like some ideas on how to create a linestyle containing two lines in the color red, with fill in the color blue. This will be used in a mapping environment to create the roads. I do have it in ArcGIS but unable to create in MicroStation. Any suggestions?
It is a bit clunky but it can be done. Corners and sharp angles are a problem.
I created a Stroke, Point & Compound to accomplish this.
A Blue shape (1x12) for the inserted Symbol (using RGB values, so the Color Table would not affect it.)
Used the inserted Symbols Color (Blue).
Created 2 offset lines, Line Code 0 (+6 -6 for Road Width (12)) in the Compound.
I made other adjustments to make it all work the best I could, so you are going to have to look at the components to see what settings I made. I have attached the BlueRd.rsc.
Set your active Wt. & Color to the Lines Color & Wt.
0550.BlueRd.rsc
I Hope This Helps Someone Reading This! (Intergraph>PseudoStation>MicroStation user since 1980's)
George is on the right track here I believe. The only thing I would change is not using a point element for the fill. Instead I would create another stroke pattern and apply a width to it . See screenshot for this option. This will produce a wide line that can be placed between the 2 border lines. The great part is that it will be smooth around arcs.
Microstation CONNECT 10.17.00.209
ORD CONNECT 2021 R1 10.10.1.3
Microstation v8i SS 10 08.11.09.919
Power InRoads v8i 08.11.09.615
ProjectWise 10.0.3.453