Can some please explain why or how you uses the following in element templates
Levels you can have a primary level which seems to be the level the template will take when it is used, yet you can added multiply levels below this which dont seem to have any function at all.
This also seem to apply to all the attributes within the templates including colour fill, hatching etc
many thanks
Mark
Timothy Hickman
CADD Manager | CADD Department
timothy.hickman@colliersengineering.com
Main: 877 627 3772|
1000 Waterview Drive Suite 201 | Hamilton, New Jersey 08691
Hi Rod,
Unknown said:I don't quite understand your explanation of how to select a different property in the element template.
As far as I know there is no such option. If there are e.g. 4 color defined in a template, still full color table is available ... which consequently means it's easy to select a color that doesn't conform to the template. But I am also curious if some trick exists.
Regards,
Jan
Bentley Accredited Developer: iTwin Platform - AssociateLabyrinth Technology | dev.notes() | cad.point
Rod WingSenior Systems Analyst