Key-in: Working Units>Master Unit: Feet> Label:_____

Hello,
could you state what version of MicroStation you are using(08.XX.XX.XXX)?
Have you recently customized your Units.def file?
The units 'tenths' are not listed in the default Design File settings of MicroStation.
There is alot of information on this area in the Help:
Help > Contents (search for "units.def")
Your units.def file can be found at this location:
..\Program Files\Bentley\Workspace\System\data\UNITS.DEF

Regards
Derval.

leave the working units set to feet and tenths and set the accuracy to zero. Where you need to make a change is in the dimensions. Go to Element>DimensioonStyles select the units tab and check the "use working units" option, then set the label format to MU and the accuracy to zero. This shouold give you the readout you want when measuring.

just wanted to follow up on this - did this answer your question ?

Tim,

Actually I did not get the answer I was looking for. I have been looking for key-ins to:

Set the accuracy to zero (vba execute ActiveSettings.CoordinateAccuracy = msdAccuracy0) and was hoping for something along the same line to set the label to be blank. I'm guessing the way I phrased the question was unclear. All I wanted was to have a key-in to have nothing in the LABEL for Master Unit in the Design File Setting. The image shows how microstation measures a selection set of lines (FT & 2 decimal places) and when I change those settings to BLANK & '0', the last image shows what I'm looking for

I am working on Ver 08.11.09.459; The Units are being set in the pcf

Thank you for your help!

forgive me for being curious but if your just using the measure tool why do you care or even want the units not displayed ?