Sir's
I am Anas. New member in Microstation family.. I am not very well in microstation so please help me if I have doubts.
I am working in Road & infrastructure works & drawings. I need to put some coordinates in my drawing. How I can put or place coordinates with leader?
go here ( next line) and get civtools for v8i
http://communities.bentley.com/communities/other_communities/bentley_library/m/bentley_library_utilities
unzip and put all contents in a folder that makes sense to you , it really should go where all the other mdls live but as your new its easier this way
now to load it you will need to have the Key in window open if its not visible go to help pull down and youll see key in click on it then
drag this up to the top bar as you need to use it often..
now to load your new tool in the key in window key in "mdl load" (without quotes)
then hit the enter key a new dialog should open and the lower left should have browse button use it to browse where you put civtools.ma
and click on it and it should run the tool pallet, first time it may pop a message just ok and it loads the new pallet of civ tools
If you read through information file in the zip you should know what each tool does but
first time you'll need to set up parameters see my picture marked 2
then run or click the NE button I marked it 3..
This is the most usefull tool set for civil it can do loads more things ie label 3d contours etc... but I use the NEZ button the most... you can even change it to ENZ
Lorys
Started msnt work 1990 - Retired Nov 2022 ( oh boy am I old )
But was long time user V8iss10 (8.11.09.919) dabbler CE update 16 (10.16.00.80)
MicroStation user since 1990 Melbourne Australia.click link to PM me