Level Properties Dialog Box

Question

Sometimes when I try to check the usage on some levels this is what I get. 
 Does anybody know why?

Andrew Bell · Answer

What you're describing is a graphics display issue with is usually related to the driver you have installed or the age of the hardware. The following Wiki article will assist with identifying what may be the cause or to remedy your particular situation. 
 https://communities.bentley.com/products/microstation/w/microstation__wiki/13543/troubleshooting-graphics-display-issues 
 If you haven't already you might like to check with the manufacturer of the graphics card to ensure you have the latest they provide. Otherwise you might need to consider configuring your system to use an older version of DirectX. This would really only be a workaround. 
 ---------------------------- 
 A. Go to - Control Panel\All Control Panel Items\System\Advanced System Settings 
 B: Click on Environment Variables, see picture below. 
 
 C: Under System Variables click on New&hellip; 
 
 D: Create a New System Variable 
 For V8i versions, use enter: Variable name: QV_D3DVERSION Variable value: 9 
 For CONNECT Edition versions enter: Variable name: QV_DISABLE_D3D11 Variable value: 1 
 Click OK