[V8i] Text Node GCS reprojection

When  I change Geographic coordinate system from NTF.Lambert1 to IGN.RGF93 evrything is well reprojected except Text nodes.

They do not move. Even if change MultiLine Text reprojection settings to always.

If I drop them to simple text. They move correctly.

Thanks for any Help

Remy

Parents
  • Remy,

    This is a bug that affects some text nodes, usually text nodes that were placed with an earlier version of MicroStation. It has been fixed in MicroStation CONNECT, but there is a workaround you can use to get it to work in V8i. You need to rotate your text nodes by zero degrees. That doesn't really do anything except upgrade the text nodes to the later standard. The way I did in your test case was to place a fence around everything, select Manipulate Fence Contents->Rotate, select Active Angle as the Method, set my active angle to 0 degrees, then hit a data point to rotate. Nothing visible happens, but now you will be able to reproject the text nodes.

    Hope that helps!
    Barry Bentley



    Answer Verified By: Remy Weil 

Reply
  • Remy,

    This is a bug that affects some text nodes, usually text nodes that were placed with an earlier version of MicroStation. It has been fixed in MicroStation CONNECT, but there is a workaround you can use to get it to work in V8i. You need to rotate your text nodes by zero degrees. That doesn't really do anything except upgrade the text nodes to the later standard. The way I did in your test case was to place a fence around everything, select Manipulate Fence Contents->Rotate, select Active Angle as the Method, set my active angle to 0 degrees, then hit a data point to rotate. Nothing visible happens, but now you will be able to reproject the text nodes.

    Hope that helps!
    Barry Bentley



    Answer Verified By: Remy Weil 

Children
No Data