Set active symbology batch process

Hello all,

I need help to set multiple dgns to the following symbology before I process a batch place text:

symbology as follows:

LV=0

C0=0

WT=0

I tried this in my txt command file but no change in dgns.

Thanks for any advise

Parents
  • It would be very helpful if you could expand on the description you are providing here with details regarding what commands are being performed within this batch process. That way we may be able to understand the exact workflow you are attempting to perform and what changes you are trying to make. It would also be helpful if you could provide the version of MicroStation being used. This can be located under > Help > About MicroStation.

    Regards
    Andrew Bell
    Technical Support
    Bentley Systems

Reply
  • It would be very helpful if you could expand on the description you are providing here with details regarding what commands are being performed within this batch process. That way we may be able to understand the exact workflow you are attempting to perform and what changes you are trying to make. It would also be helpful if you could provide the version of MicroStation being used. This can be located under > Help > About MicroStation.

    Regards
    Andrew Bell
    Technical Support
    Bentley Systems

Children