CONNECT - Accudraw not working as SS3.

RE: CONNECT - Accudraw not working as SS3.

Erik Mendoza — Fri, 16 Oct 2015 21:54:18 GMT

In the AccuDraw Settings box that Dan mentioned, what is the tolerance set to? If too low, you may not be able to notice the tool remembering the distance because the sphere of tolerance around the remembered distance is too small.

RE: CONNECT - Accudraw not working as SS3.

Brien Bastings — Fri, 16 Oct 2015 12:44:18 GMT

[quote user="stuartw"]In SS3 when I move an element or reference by a certain distance this distance would be remembered for the next element/reference you moved. This doesn't work in CONNECT and means I have to key in the distance each time. [/quote]

This was a bug that was first corrected in 08.11.09.124. Only locked values should be recorded in the distance/angle history. You also don't need to key-in values to save them in the distance/angle history, you just need to lock them. So for example, if you are in polar mode and are snapped to the point/distance you want saved, just type "D" before accepting the data point and that distance will be recorded. HTH

-B

RE: CONNECT - Accudraw not working as SS3.

stuartw — Fri, 16 Oct 2015 09:58:53 GMT

Distance is ticked!

RE: CONNECT - Accudraw not working as SS3.

Dan Eng — Thu, 15 Oct 2015 23:00:22 GMT

Hello,

In the AccuDraw Settings, under the Coordinates tab, can you check to see if Distance is toggled on under Indexing? If there is not a check mark, this may be why it is not remembering the last distance in AccuDraw. Please let me know.

Thanks,
Daniel Eng