https://communities.bentley.com/products/microstation/f/microstation-forum/113397/microstation-v8i-series3-v-08-11-09-459-and-bu-353-s4-usb-gps-receiverHi, I have been able to get Bentley Map to track my movements, but have been unable to get Microstation to do likewise though the same tools are available. In BM, as long as the session is active, I can see the tracks, but am unable to manipulate. Ien-USTelligent Community 12https://communities.bentley.com/thread/349214?ContentTypeID=1Tue, 08 Dec 2015 01:21:19 GMT6dad98f5-dbc9-4c4d-a9ba-e9da8dc6aa8e:94ab68d6-baf6-4dda-9e73-ebf16a1c1c4bKeith RaymondSo a track is generated. Can you post a DGN with the track that gets created?<div style="clear:both;"></div>https://communities.bentley.com/thread/349185?ContentTypeID=1Mon, 07 Dec 2015 20:52:44 GMT6dad98f5-dbc9-4c4d-a9ba-e9da8dc6aa8e:2195e513-4b42-451a-bd93-e2bfab8d4925Joe GlazierI am using V8i, select series 3 - v 08.11.09.459. and have also attempted to use with MicroStation Telco V8i - v 08.11.09.524 with the same results. When I try to activate the antenna, the button will not do anything. I downloaded Bentley Map V8i, select series 4, v 08.11.09.615 and it activates fine. I just can not manipulate the track that is generated. Any help is greatly appreciated!<div style="clear:both;"></div>https://communities.bentley.com/thread/349183?ContentTypeID=1Mon, 07 Dec 2015 20:30:13 GMT6dad98f5-dbc9-4c4d-a9ba-e9da8dc6aa8e:d2b1e725-191b-48d2-b280-7207d2b6a1baKeith RaymondWhat is actually happening in MicroStation? And what version are you using? Not that it should matter because if you are able to get a position with the GPS then the interface should be working and the tracking should also work.<div style="clear:both;"></div>