dgn viewer

the installation doesn't go ahead or the software request some tools that I don't have: Microsoft visual basic for Application core/localized, or DHTML Editing control for application.

Do you recall seeing this while installing Bentley View 08.11.09.829?

If you saw the screen above it would indicate these components were already installed. If you saw a red cross where the green checks are by any of these components it means that they were not applied to the operating system during installation.

I would recommend loading the prerequisites manually by down loading version 08.11.09.03 of the prerequisite pack and then installing this before running the installation of Bentley View.

communities.bentley.com/.../9020.how-to-download-the-prerequisites-for-microstation-selectseries-3

1°:after download the software:

2°: In yellow, the softwares to be installed as  It's required

3° After installation, some softwares need to be installed:

4° I go here and try to install the package of missing software:

The

5° The last page after pres GO TO PERSONAL PORTAL is:

thanks

Are there supposed to be screenshot included with this post? There are blank spaces here that would indicate there should.

1°:after download the software:

2°: In yellow, the softwares to be installed as required

3° Even after installation, some softwares still required:

4° I go here and try to install the package of missing software:

5° But once pressed GO TO PERSONAL PORTAL, I can't go forward

I hope you see the pictures now, sorry I don't have experiance with this tools

So your 2nd screenshot shows 'Product pre-requisite components' list and those get automatically downloaded (if needed) during the installation.

Next, 3rd screenshot - shows that indeed component 'Microsoft Visual Basic for Applications core' is downloading (shows percentage). Have you waited a while it gets downloaded? Possibly download could be blocked by company Proxy or antivirus.

Regards,
Darius

Hi,

I am stuck at the same point
I proposed your software in my company and after they accepted to integrate this software, it is IMPOSSIBLE to install
I get stuck at the download point of requisite software, nothing will ever download despite the internet access is ok

What about a download with a full offline installer
6 month later after the first post still the issue still present and not corrected..... and no workaround nor updated application?

Hi,

I am stuck at the same point
I proposed your software in my company and after they accepted to integrate this software, it is IMPOSSIBLE to install
I get stuck at the download point of requisite software, nothing will ever download despite the internet access is ok

What about a download with a full offline installer
6 month later after the first post still the issue still present and not corrected..... and no workaround nor updated application?

Did you try the suggestion made previously to manually download the prerequisites and install those before proceeding with your installation?

communities.bentley.com/.../9020.how-to-download-the-prerequisites-for-microstation-selectseries-3

If you have, what were the results of this?