When I place a dimension or leader the arrowhead(s) will show until I accept the placement THEN the arrowhead(s) disappear. I thought that maybe the arrowheads might just be very small but when I dropped the dimension and select elements only the lines were found. The arrowhead is a cell. I changed it to a different cell, something weird just to see if it would work and it did work. I placed the cell into the drawing with no problem too. I even copied a dimension from another drawing, imported the dim style but nothing seems to work.
Does anybody have an idea on why this is happening,
Thanks
Microstation CONNECT 10.17.00.209
ORD CONNECT 2021 R1 10.10.1.3
Microstation v8i SS 10 08.11.09.919
Power InRoads v8i 08.11.09.615
ProjectWise 10.0.3.453
Dean B, nothing checked accept Start and End Extension, like normal.
I discovered something but don't know why this is this way.
I'm attaching a dgn file. In this file is one dimension. In View 1, I fit view and the distance from the top left, which seems to be the arrowhead, to the dim text is 2196600178.70 ft when I measure point to point! What does THAT mean?!?!? In View 2 is the dimension
When I copy the dimension to my clipboard and place it into a different dgn, it looks fine and works like it is supposed to.DIMENSIONPROB.dgn
Thanks Dean B. I'm not using a Style just :Style:(none). I could go into the struggles I have with trying to get some to use specified styles but that would be for another day (or not). Anyway, using the 'none' style hasn't been problem before this and it seems to be in this one file, which by the way, is one of our base files.
I have attached the cell libraryCTCELLIB.cel