Cursor Crosshair Turned Black Colour

Hi,

As the title, my cursor's crosshair has changed to a blck colour making it impossible to see.

I have tried using key in: set xor to change the colour but it does nothing.

Any ideas?

Thanks

AC

Parents
  • Did you try going to <Settings <Design File & under the Color option check the setting for Drawing Pointer Color? This is where I change my cursor color. If you can see the cursor but just not the cross hairs I would assume 1 of 2 things. First, is your display driver current? Second, does this happen in all files or one particular file? If one or a few files then I would say it is a display setting within the file otherwise I would suspect the file may be corrupted.

    Check the color option first.

    Microstation CONNECT - 10.17.2.61

    ORD - 2021 R1 10.10.1.3

    ORD 2022 R1.1 - 10.11.3.2

    ORD 2022 R3 -  10.12.2.4

    Microstation v8i SS 10 - 08.11.09.919

    Power InRoads v8i - 08.11.09.615

    ProjectWise - 10.0.3.453

Reply
  • Did you try going to <Settings <Design File & under the Color option check the setting for Drawing Pointer Color? This is where I change my cursor color. If you can see the cursor but just not the cross hairs I would assume 1 of 2 things. First, is your display driver current? Second, does this happen in all files or one particular file? If one or a few files then I would say it is a display setting within the file otherwise I would suspect the file may be corrupted.

    Check the color option first.

    Microstation CONNECT - 10.17.2.61

    ORD - 2021 R1 10.10.1.3

    ORD 2022 R1.1 - 10.11.3.2

    ORD 2022 R3 -  10.12.2.4

    Microstation v8i SS 10 - 08.11.09.919

    Power InRoads v8i - 08.11.09.615

    ProjectWise - 10.0.3.453

Children