Looking for the Label line tool to add Bearing and distance to boundary lines.
Can not seem to find it.
I am using MicroStation V8i
You can find "Label Line" in the "Dimension Element" toolbox
This is not bearing. That is angle and distance.
Change your Angle Readout settings...
* This thread is also really old, better to create a new one with your questions.
I did that. It turns out its a bug in ORD3.
Power GeoPak 08.11.09.918Power InRoads 08.11.09.918OpenRoads Designer 2021 R2
I don't have ord 3 but it does work in V8iss3-10 .. if you have set your read out to bearings , then after the line has been labelled by angle in ord , then get the properties of the line if it shows it as bearing then copy and edit).
Otherwise for now until ord is fixed do it in v8i ... only other alternative is to make a vba macro (seems a bit extreme) or an equation in excel to calculate bearing from angles relatively easy try google there are bound to be loads of free ones as lots of surveyors use these and share.....
Started msnt work 1990 - Retired Nov 2022 ( oh boy am I old )
But was long time user V8iss10 (8.11.09.919) dabbler CE update 16 (10.16.00.80)
MicroStation user since 1990 Melbourne Australia.click link to PM me