I don't have ord 3 but it does work in V8iss3-10 .. if you have set your read out to bearings , then after the line has been labelled by angle in ord , then get the properties of the line if it shows it as bearing then copy and edit).

Otherwise for now until ord is fixed do it in v8i ... only other alternative is to make a vba macro (seems a bit extreme) or an equation in excel to calculate bearing from angles relatively easy try google there are bound to be loads of free ones as lots of surveyors use these and share.....

Lorys

Started msnt work 1990 - Retired Nov 2022 ( oh boy am I old )

But was long time user V8iss10 (8.11.09.919) dabbler CE update 16 (10.16.00.80)

MicroStation user since 1990 Melbourne Australia. click link to PM me

I don't have ord 3 but it does work in V8iss3-10 .. if you have set your read out to bearings , then after the line has been labelled by angle in ord , then get the properties of the line if it shows it as bearing then copy and edit).

Otherwise for now until ord is fixed do it in v8i ... only other alternative is to make a vba macro (seems a bit extreme) or an equation in excel to calculate bearing from angles relatively easy try google there are bound to be loads of free ones as lots of surveyors use these and share.....

Lorys

Started msnt work 1990 - Retired Nov 2022 ( oh boy am I old )

But was long time user V8iss10 (8.11.09.919) dabbler CE update 16 (10.16.00.80)

MicroStation user since 1990 Melbourne Australia. click link to PM me