Cell library is taking 1-2 minutes to change active cell via the Cell Library list.
The library is under 2 MB and has about 400 pipe fittings.
If I do this in a small file it only happens the first time I go to change a cell. However if I'm in a similar file with an 11 GB point file attached it takes 1-2 minutes EVERY time I change cells. If I key in the cell name using the place cell dialog it changes quickly.
Running CE u2 on Windows 10 w/12GB memory. All files are local.
Unknown said:11Gb? That's a serious file
One of the driving requirements for a 64-bit MicroStation is the ability to handle large models. A 32-bit application (e.g. MicroStation V8i) is unable to handle more than 2Gbyte of address space1. Hence, a 32-bit app. would find it hard to accommodate an 11Gbyte file.
MicroStation CONNECT is 64-bit and, given sufficient physical memory, can — or should be able to — handle such large files.
Note 1: A 32-bit Windows operating system restricts applications to 2Gbyte address space in normal circumstances.
Regards, Jon Summers LA Solutions
David, Although undefining the MS_CELLLIST works to stop the lag, this is a workaround rather than a solution, can you un-verify my post as a solution please. The MS_CELLLIST variable is quite important when it comes to creating standards and I would prefer Bentley to fix this, rather than think that we are all happy just not using it. Thanks