MicroStation SS3. This problem just started in the last couple of days. In the attached file, fit the view and start the Place Smartline tool. Click a location above or below the blue box to indicate the start of the line. The actual starting location is inside the box. This happens with the Place Block and Place Active Point tools, also.Line Test.dgn This a appears specific to certain files.
Your View 1 has a different ACS then the standard
View 1 ACS
View 2 ACS
If you draw in View 2 the line works as expected
Microstation CONNECT - 10.17.2.61
ORD - 2021 R1 10.10.1.3
ORD 2022 R1.1 - 10.11.3.2
ORD 2022 R3 - 10.12.2.4
Microstation v8i SS 10 - 08.11.09.919
Power InRoads v8i - 08.11.09.615
ProjectWise - 10.0.3.453
You can open the ACS dialog and reset the ACS origins to 0,0,0 if you do not want to use that ACS in the file.