Setting up multiple projects and assigning .pcf and .ucf to each project.https://communities.bentley.com/products/microstation/f/microstation-forum/131088/setting-up-multiple-projects-and-assigning-pcf-and-ucf-to-each-projectHi, Is there a way to assign .pcf and .ucf file to microstation files on a server, so it will know which .pcf and .ucf file to use. For example, if i open a microstation file in specific folder, it will automatically use .pcf and .ucf file that i assigneden-USTelligent Community 12RE: Setting up multiple projects and assigning .pcf and .ucf to each project.https://communities.bentley.com/thread/400204?ContentTypeID=1Fri, 27 Jan 2017 15:37:21 GMT6dad98f5-dbc9-4c4d-a9ba-e9da8dc6aa8e:435c7111-6147-4081-ba28-f6c08381df5eSoojong OhI heard that Microstation Select Series 4 has connect edition features. Do you think with SS4, you can assign .pcf and . ucf to specific projects?<div style="clear:both;"></div>RE: Setting up multiple projects and assigning .pcf and .ucf to each project.https://communities.bentley.com/thread/400093?ContentTypeID=1Thu, 26 Jan 2017 20:45:56 GMT6dad98f5-dbc9-4c4d-a9ba-e9da8dc6aa8e:e1645ce7-c650-455e-b9ee-759dca0dc3fcTim HickmanMicroStation CONNECT Edition has the ability to associate a DGN file to a specific workspace and workset. Anything previous to this does not. Previous to CONNECT, the project and user needed to be selected before entering into a design file.<div style="clear:both;"></div>