Plotting a bingmap aerial raster

I was able to attach bing map, but when I create a pdf, it doesn't get printed. Anyone know how to fix this?

I found it depends on the scale of your drawing. I believe the Bing aerial will plot if you have something about 1"=150'. If you are at a smaller scale than that you will loose the image on the plot. Same as if you zoom in too close and you get the little tiles with the camera and the line through it on the Bing Maps sight. You may be able to do a screen capture and save it as an image file on your pc and then reference that in. We ran into this problem a few weeks ago. I'm not sure if the person who encountered it ever came up with a good workaround. If you can make your plot at 1"=150' it should woork.

I just tried 150, 200 and 300 scale, but still doesn't print.

Unknown said:

I just tried 150, 200 and 300 scale

1"=150' is 12x150 (1 foot = 12 inches; 1' = 12").  That's 1800.

Let's star with the basic.

1 - Do you see the raster image in print preview?

2 - You can set level to rasters. If this level is non printable you don't get this in output - Level Manager:

3 - You can set raster objects to print or not independently from the level - Raster Manager:

Maybe this should be moved to https://communities.bentley.com/products/microstation/microstation_printing/

Regards

I was able to plot it using 400 scale. Thanks for your help.

I was able to plot it using 400 scale. Thanks for your help.

Try reducing Raster Quality to 16
Try reducing resolution to 96 DPI