raster manager will not show raster file after file is closed

I am using microstation V8 2004 edition (V7 mode) with I/RAS B. I can load a .cit file from the raster manager dialog box and make edits and changes to the .cit file until I close the file. When I reopen the file the .cit file still appears in the file but does not show up in the raster manager dialog box. The file does show up in the I/RAS B layer info dialog box though (Bentley I/RAS B Command Menu->File->Layer Info->All Layers). It is a pain to have to keep detaching and reattaching the file and performing all the work over and over again.

Any ideas how to fix this?

Thank you,

Jay G.

Parents

0 Offline MaryB Wed, Jun 7 2017 9:59 AM
If you are in V7 Mode, I suspect that it may be a limitation of the V7 file structure. I don't have a good way to check this out, but I know that V8 had some significant enhancements over V7 version, and I believe that Raster Manager was one of those. It may be that V7 files just can't store and save the raster in the same way that V8 files can. Is it possible for you to save your file to a V8 version to test that out?

MaryB

Power GeoPak 08.11.09.918
Power InRoads 08.11.09.918
OpenRoads Designer 2021 R2
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel

Reply

0 Offline MaryB Wed, Jun 7 2017 9:59 AM
If you are in V7 Mode, I suspect that it may be a limitation of the V7 file structure. I don't have a good way to check this out, but I know that V8 had some significant enhancements over V7 version, and I believe that Raster Manager was one of those. It may be that V7 files just can't store and save the raster in the same way that V8 files can. Is it possible for you to save your file to a V8 version to test that out?

MaryB

Power GeoPak 08.11.09.918
Power InRoads 08.11.09.918
OpenRoads Designer 2021 R2
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel

Children

0 Offline jay glazebrook Wed, Jun 7 2017 10:10 AM in reply to MaryB

I had a hunch that it might be the V7 mode but I have worked for years on other projects in V7 mode with no problems. I have upgraded to V8 and tried it out but I have to convert back to V7 as this is an existing client drawing in which they want it to be kept in its original V7 mode.

Thank you for the input
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
0 Offline Melissa Hook Wed, Jun 7 2017 3:52 PM in reply to jay glazebrook
There is a variable MS_OPENV7, if you set this to 3, you can then work in the file as a native V7 file. This will also allow you to work in the same way as you would in MicroStation J. You would not have to upgrade to V8 and then save it back down, this will save you that step.
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Reject Answer

Cancel
0 Offline fmcallis Wed, Jun 7 2017 4:41 PM in reply to Melissa Hook

In Workspace > Configuration search for MS_RASTERSCAN. If MS_RASTERSCAN is set to 0 then try setting it to 1. If that does not resolve the issue please let us know. It has been a while so I will have to investigate some more.
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Reject Answer

Cancel
0 Offline jay glazebrook Wed, Jun 7 2017 4:48 PM in reply to fmcallis

I just tried changing it to 1. The result is the same, the raster loads back up but does not show up in raster manager dialog box.
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
0 Offline fmcallis Thu, Jun 8 2017 9:45 AM in reply to jay glazebrook

Can you tell me what you have MS_OPENV7 set to in I/Rasb?
This morning I tried I/Rasb 08.05.02.35. In I/Rasb I set MS_OPENV7 to 3. I opened a V7 DGN file in I/Rasb 08.05.02.35 and the CIT image was attached. I did File > Exit and check Raster Manager and the CIT showed in the list. Can you open a Service Request and I will contact you and make sure we are doing the same steps.
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel