raster manager will not show raster file after file is closed

I am using microstation V8 2004 edition (V7 mode) with I/RAS B. I can load a .cit file from the raster manager dialog box and make edits and changes to the .cit file until I close the file. When I reopen the file the .cit file still appears in the file but does not show up in the raster manager dialog box. The file does show up in the I/RAS B layer info dialog box though (Bentley I/RAS B Command Menu->File->Layer Info->All Layers). It is a pain to have to keep detaching and reattaching the file and performing all the work over and over again.

Any ideas how to fix this?

Thank you,

Jay G.

Parents

0 Offline MaryB Wed, Jun 7 2017 9:59 AM
If you are in V7 Mode, I suspect that it may be a limitation of the V7 file structure. I don't have a good way to check this out, but I know that V8 had some significant enhancements over V7 version, and I believe that Raster Manager was one of those. It may be that V7 files just can't store and save the raster in the same way that V8 files can. Is it possible for you to save your file to a V8 version to test that out?

MaryB

Power GeoPak 08.11.09.918
Power InRoads 08.11.09.918
OpenRoads Designer 2021 R2
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
0 Offline jay glazebrook Wed, Jun 7 2017 10:10 AM in reply to MaryB

I had a hunch that it might be the V7 mode but I have worked for years on other projects in V7 mode with no problems. I have upgraded to V8 and tried it out but I have to convert back to V7 as this is an existing client drawing in which they want it to be kept in its original V7 mode.

Thank you for the input
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
0 Offline fmcallis Wed, Jun 7 2017 4:41 PM in reply to Melissa Hook

In Workspace > Configuration search for MS_RASTERSCAN. If MS_RASTERSCAN is set to 0 then try setting it to 1. If that does not resolve the issue please let us know. It has been a while so I will have to investigate some more.
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Reject Answer

Cancel
0 Offline jay glazebrook Wed, Jun 7 2017 4:48 PM in reply to fmcallis

I just tried changing it to 1. The result is the same, the raster loads back up but does not show up in raster manager dialog box.
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
0 Offline fmcallis Thu, Jun 8 2017 9:45 AM in reply to jay glazebrook

Can you tell me what you have MS_OPENV7 set to in I/Rasb?
This morning I tried I/Rasb 08.05.02.35. In I/Rasb I set MS_OPENV7 to 3. I opened a V7 DGN file in I/Rasb 08.05.02.35 and the CIT image was attached. I did File > Exit and check Raster Manager and the CIT showed in the list. Can you open a Service Request and I will contact you and make sure we are doing the same steps.
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
0 Offline jay glazebrook Thu, Jun 8 2017 10:12 AM in reply to fmcallis

I just looked and MS_OPENV7 has always been set to 3. The I/RAS B version I have is 08.05.02.63 if that helps any.
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
0 Offline fmcallis Thu, Jun 8 2017 1:18 PM in reply to jay glazebrook

Can you open a Service Request and I will contact you. I need to know the steps that you are doing. Are you opening a V7 DGN file in I/Rasb 08.05.02.63 and attaching a CIT image and the CIT image displays? You exit I/Rasb and the CIT image does not show in Raster Manager? When I do the steps the CIT image displays in I/Rasb and shows in Raster Manager and displays. Are you using a V8.5 DGN file or a V7 DGN file?
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel

Reply

0 Offline fmcallis Thu, Jun 8 2017 1:18 PM in reply to jay glazebrook

Can you open a Service Request and I will contact you. I need to know the steps that you are doing. Are you opening a V7 DGN file in I/Rasb 08.05.02.63 and attaching a CIT image and the CIT image displays? You exit I/Rasb and the CIT image does not show in Raster Manager? When I do the steps the CIT image displays in I/Rasb and shows in Raster Manager and displays. Are you using a V8.5 DGN file or a V7 DGN file?
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel

Children

0 Offline fmcallis Thu, Jun 8 2017 1:29 PM in reply to fmcallis

Are you leaving the DGN files as V7 or are you converting them to V8.5? Since CIT images are not version dependent then it will not matter if the CIT is attached in a V7 DGN or a V8 DGN. Is the CIT image already attached in the V7 DGN file or are you attaching the CIT image to the V7 DGN file? When you attach the CIT image does it display in the V7 DGN file?
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel