Active Scale default

My company uses a very old version of Microstation (Ver 5.07, 1998). I want to know if there is some way to set the Active Scale to 1.0 so that I don't have to change it every time I import or copy something into the drawing. So far, I have tried going into the Design File>Active Scale> change it to 1.0, then Save Settings. When I exit and reenter it goes back to 4.0. Any help?

  • save settings should do the trick. Maybe try keying in the setting rather than picking it thru the dialog. Try AS=1, hit enter, then save settings. Get out of and then back into the file and see if it holds.

    Timothy Hickman

    CADD Manager | CADD Department

    timothy.hickman@colliersengineering.com

    Main: 877 627 3772| 

    1000 Waterview Drive Suite 201 | Hamilton, New Jersey 08691

  • I've had the key-in AS=1 on a function key since about that version of Microstation...It is really handy. While it doesn't solve your issue, it would certainly make resetting the scale a single-key breeze.

    MaryB

    Power GeoPak 08.11.09.918
    Power InRoads 08.11.09.918
    OpenRoads Designer 2021 R2

        

  • It still doesn't work. When I start the application back up, it says "Active Display Set To 4.00"

    What I also don't understand is that my coworker uses the same program, and his Active Scale is always set to 2.00, which tells me that it is something that can be changed. Any more ideas?

  • if your  using  old mstn then you probably  have one of two things  happening

    1, Its preset in the settings manager ( old tool no longer used) 

    or 2. a macro or mdl is being loaded at start up  so look in workspace configuration under applications   

    see my workspace has a tool being loaded at startup ( the blue area) ..

    when you start mst from the icon what  does msnt manager tell you you your workspace and user and interface are , write them down

    now go back and  change to new , new  , default  and see  what  happens

    create new dgn form clean seed , key in as=? enter and the  active scale will be displayed... should be 1

    open your seed file and  keyin as=? enter and again should be  1, if not  change it and save settings....

    if still now joy.. then you need to escalate to Bentley  select support and maybe do a  debug report and also send a copy  of the workspace config and user config to Bentley ....

    Meanwhile create the  following on an F key ( as mary already suggested) I suggest using the F1 as  you can call up help many other ways

    AS=1;FILEDESIGN

    and  just  run the F1 everytime you open a dgn until you can fix the problem....

    Lorys

    Started msnt work 1990 - Retired  Nov 2022 ( oh boy am I old )

    But was long time user V8iss10 (8.11.09.919) dabbler CE  update 16 (10.16.00.80) 

    MicroStation user since 1990 Melbourne Australia.
    click link to PM me 

    Answer Verified By: Benjamin Burdick 

  • One other thing to check is under workspace configuration and under user commands.  Check to see if there is a Startup User Command listed.  It's possible that a user command is making this and other settings at startup.