HOW TO ROTATE TEXT OR ELEMENT TO ANOTHER ELEMENT V8I

Ive been trying to do this  for ages  an it was driving me  nuts... too many  steps with accudraw to go wrong, found a few clues in old posts and  filled in the blanks

keyin ROTATE VIEW ELEMENT; %d;%d;ACTIVE ANGLE PT2

( THE ABOVE COULD BE SET TO AN F KY  IF YOU USE IT ALOT)

You'll be  prompted t select an element ( text or line or shape) to set the  view rotation

Then you'll need to Tentatative twice on the reference  line element ( the  one you want to rotate to) one end first and then the other end last

now you active angle is the angle of the reference  line

next  we click on the rotate icon and it has the new angle set, so now click on the text or element you want rotated

now key in vi=top to return the view ot original state and our text or line as adopted the angle of the reference element line... 

I tried to make another  keyin  

rotate icon;%d;vi=top

but it works like this select the text to rotate, data point in the view and  reset button mouse. then it rotates the text to right angle and sets view back to normal but doesnt

work if you use your  mouse buttons in any other order it fails to do what you want  cant work out why  but works.. other wise the rotate bit can view top can just be done by hand  or icons etc

Autocad has all this  much easier R for rotate  and option is reference so r and  two clicks and  done... 

I wish we had a simple tool or  macro with two clicks... 

Parents
  • ActiveAngleAssistant.zip

    Here is a macro that I've collected over the years that will rotate text and text nodes and cells to the active angle, or an element angle. It has a couple of other functions that might be useful.

    MaryB

    Power GeoPak 08.11.09.918
    Power InRoads 08.11.09.918
    OpenRoads Designer 2021 R2

        

  • I have that same macro and I was going to mention it, but I found that it did not seem very reliable. I have not used it in a long time. If I remember correctly you cannot get the active angle from a specific segment of a chained line.

    Microstation CONNECT 10.17.00.209

    ORD CONNECT 2021 R1 10.10.1.3

    Microstation v8i SS 10 08.11.09.919

    Power InRoads v8i 08.11.09.615

    ORD CONNECT 2021 R1 10.10.1.3

    ProjectWise 10.0.3.453

  • I also use the Place Text Along Element occasionally. Only if I am in a hurry to get some text rotated to an element. I found that with v8i there seems to be some type of bug with this method. When you place the text using the "Along Element" setting then try to edit the text later, the text jumps off into space.

    To me, the most reliable and consistent method is to use Accudraw.

    Microstation CONNECT 10.17.00.209

    ORD CONNECT 2021 R1 10.10.1.3

    Microstation v8i SS 10 08.11.09.919

    Power InRoads v8i 08.11.09.615

    ORD CONNECT 2021 R1 10.10.1.3

    ProjectWise 10.0.3.453

Reply
  • I also use the Place Text Along Element occasionally. Only if I am in a hurry to get some text rotated to an element. I found that with v8i there seems to be some type of bug with this method. When you place the text using the "Along Element" setting then try to edit the text later, the text jumps off into space.

    To me, the most reliable and consistent method is to use Accudraw.

    Microstation CONNECT 10.17.00.209

    ORD CONNECT 2021 R1 10.10.1.3

    Microstation v8i SS 10 08.11.09.919

    Power InRoads v8i 08.11.09.615

    ORD CONNECT 2021 R1 10.10.1.3

    ProjectWise 10.0.3.453

Children
No Data