Dear all good morning,
I TRY TO BATCH CONVERT FROM MICROSTATION V8I TO AUTO CADD FILES.. AUTO CADD FILES ARE OK.THEN I MAKE SOME CHANGES AND TRY TO BATCH CONVERT FROM SAME AUTO CADD FILE TO MICROSTATION V8i . BUT IN MY MICROSTATION FILES CHANGED THE COLORS . PLS GIVE ME ADVICE FOR THIS PROBLEM.
If you want to do this you'll need to export to DWG, do those changes then open the Autocad file with Microstation and export using another Remap file to put stuff back the way it was.
If possible, I would highly recommend you keep them in Microstation until they're done. Even if you get all the stuff re-mapped correctly you may find other anomalies.
Connect r17 10.17.2.61 self-employed-Unpaid Beta tester for Bentley
Mr Bob rayner
Thank you for your reply.
Am using v8i-version08.11.05.17 Some time I have more than 100 drawings want to convert dgn files so I am using batch convert. To Dwg file …this converted dwg file I give to department base they are work in Dwg and I want to convert final Dwg to Dgn.
What you mean re-mapp can you explain this.
You can create a CSV file that is used in the Save As, Export or Batch Convert Process this will allow you to set or change colors, linestyles, levels etc. See the wiki for CSV remapping.
https://communities.bentley.com/products/microstation/w/microstation__wiki/2916/the-power-of-csv?CommentId=85587998-c3b6-4246-a9b0-668b86849782