Hi. Short and to the point: in Microstation V8i, is there a way to turn off the Primary Class elements similar to the way you can turn off Construction Class elements in the View Attributes Tool?
Thank you!
The following will temporarily hide all of the non-construction elements.
am i not seeing it because of the version i use?
DisplaySet is part of the right-click pop-up. I believe ISOLATE is actually part of a VBA called PokeIt: https://communities.bentley.com/products/microstation/b/microstation_blog/posts/pokeit-select-and-view-elements-based-on-attributes-from-an-element-plus-much-more
The element selected can have an effect one what that right-click menu looks like, as opposed to what it looks like without an element selected.
MaryB
Power GeoPak 08.11.09.918Power InRoads 08.11.09.918OpenRoads Designer 2021 R2
Thanks Mary, is it likely i had the wrong element(s) selected then? Would i see ISOLATE if i selected other elements (without downloading the VBA code)?
across the top of the application - do you have pulldown menus ? or do you have tabs ?
Timothy Hickman
CADD Manager | CADD Department
timothy.hickman@colliersengineering.com
Main: 877 627 3772|
1000 Waterview Drive Suite 201 | Hamilton, New Jersey 08691
tabs
ahhhhhhh - ok
click on the file tab in the upper left - go down to help - and select about MicroStation
my guess is that you are using the CONNECT edition of MicroStation
If it is CONNECT that you are using then - yes - isolate is no longer there as an option
the display set is what has replaced this
thanks Tim - and to all others who assisted. Apologies for any frustration caused :-)