Hi. Short and to the point: in Microstation V8i, is there a way to turn off the Primary Class elements similar to the way you can turn off Construction Class elements in the View Attributes Tool?
Thank you!
The following will temporarily hide all of the non-construction elements.
am i not seeing it because of the version i use?
tabs
ahhhhhhh - ok
click on the file tab in the upper left - go down to help - and select about MicroStation
my guess is that you are using the CONNECT edition of MicroStation
Timothy Hickman
CADD Manager | CADD Department
timothy.hickman@colliersengineering.com
Main: 877 627 3772|
1000 Waterview Drive Suite 201 | Hamilton, New Jersey 08691
All programs have their version information somewhere. They may hide it, but generally you'll see it in Help>About. Another hint is the folder name where you run the program from (or where the file association points).
Connect r17 10.17.2.61 self-employed-Unpaid Beta tester for Bentley
If it is CONNECT that you are using then - yes - isolate is no longer there as an option
the display set is what has replaced this
thanks Tim - and to all others who assisted. Apologies for any frustration caused :-)