I start a 3D file.
I reference in a 2D file.
I place a fence and clip the boundary.
On a fit view, the extents are like the entire design cube. I mean huge.
If I undo the clip then fit view works normally.
Is this a known issue?
Is there a fix? (Besides moving up to the latest version)
If the points of the fence are not all on the same elevation it can cause clipping issues.
Microstation CONNECT - 10.17.2.61
ORD - 2021 R1 10.10.1.3
ORD 2022 R1.1 - 10.11.3.2
ORD 2022 R3 - 10.12.2.4
Microstation v8i SS 10 - 08.11.09.919
Power InRoads v8i - 08.11.09.615
ProjectWise - 10.0.3.453
Can you give us a sample? When I had XM we didn't really have any issues.
I Hope This Helps Someone Reading This! (Intergraph>PseudoStation>MicroStation user since 1980's)
I also was not able to reproduce this behavior.
An example file would be good to figure this one out.