Split lines (pipe) to several lines

RE: Split lines (pipe) to several lines

Sebastian Grabiński — Sun, 26 Nov 2017 11:06:03 GMT

That`s it :D

Thanks Ron

RE: Split lines (pipe) to several lines

Ron Jones — Sun, 26 Nov 2017 00:11:44 GMT

Try the key-in DROP LINESTYLE

RE: Split lines (pipe) to several lines

Sebastian Grabiński — Sat, 25 Nov 2017 21:35:08 GMT

Partial Delete can be useful only if You have *.rsc file.

Even after break to (can we say) "separate" elements they are still using line style from beginnings.

When we change line style to another ( no metter how many element were created) it change line to new style (circle, line etc.) and all figure has been gone. ( if new style is continous line all "separate" elements are continous line ( old circle is change not to circle but line).

RE: Split lines (pipe) to several lines

Sebastian Grabiński — Sat, 25 Nov 2017 21:29:49 GMT

You do not understand me.
We work on various versions of Bentley programs such as Microstation, Inroads, Powercivil etc.
We also use different versions of programs : XM, V8i SS2, SS3.
Neither method works in any of the programs / versions described.

So I write that there was not relevant.

We also try to use fences or any other ideas to split lines with this style, but none of the were helpful.

Any other metohods to spli lines (with this*.rsc style) ?

RE: Split lines (pipe) to several lines

Bob Rayner — Sat, 25 Nov 2017 16:52:52 GMT

[quote user="Sebastian Grabiński"]

Version of Microstation is not relevant.

We have V8i, SS2, SS3.

[/quote]

Best answer ever! Element type is even more irrelevant.

I'll need to step away, mind reading is not working today. You folks go for it!

RE: Split lines (pipe) to several lines

Sebastian Grabiński — Sat, 25 Nov 2017 10:02:54 GMT

Version of Microstation is not relevant.

We have V8i, SS2, SS3.

Line was mady by *.rsc format, so breaking elements will not working properly.

If I have line style -> it work (better or not), but if software don`t have my *.rsc is not working.

So any ideas how to solve it?

Thanks for Your helping ;)

Regards

RE: Split lines (pipe) to several lines

Sebastian Grabiński — Sat, 25 Nov 2017 09:58:10 GMT

Break element is not solution.

RE: Split lines (pipe) to several lines

Sebastian Grabiński — Sat, 25 Nov 2017 09:56:04 GMT

Yes,

is not working properly.

RE: Split lines (pipe) to several lines

Lorys — Fri, 24 Nov 2017 22:39:37 GMT

from your screen shot, Linia in google translate means line so we infer you already dropped or never was a complex object but lines and circles, so you look as if your wanting to break your horizontal line into segments, the break line or partial delete will let you do this by a point(s) but if you want to do it by regular or equal intervals first place a vertical line crossing your horizontal line then copy parallel the vertical to a number of equal intervals then in the modify tools the break line by elements the far right tool , will let you select all te vertical crossing lines then the line to be broken result all equal length segments, then delete the temporary vertial lines,,, there are a many other ways to do this but this was the simplest and easiest to explain and do.. unless you want to do a line several kms long in to many parts... but for most users I think this the easiest and fastest way.. of course we could be more specfic if you could provide a better dgn file example and better description pictures of what you ant it to look like when done what you want......

RE: Split lines (pipe) to several lines

Bob Rayner — Fri, 24 Nov 2017 18:47:09 GMT

What element type? What application are you using?

RE: Split lines (pipe) to several lines

Jon Summers — Fri, 24 Nov 2017 16:48:21 GMT

[quote user="Sebastian Grabiński"]I can not find any info how to split line to several elements[/quote]

Try Partial Delete?

RE: Split lines (pipe) to several lines

Tuan Le — Fri, 24 Nov 2017 16:36:57 GMT

Sounds like "Break element" is what you are looking for. An example of what the end result looks like would be great.