Hi,
How to get rid of "Incompatible version of AEC objects" It's slowing down our whole process when working wit MicroStation CE updt 7 and about 150 DWG drawings.
Please help
//Christiaan
No one on this?
If you need to work with this version of MicroStation CONNECT, then any changes you make to the file will break the AEC objects and they will no longer work with the software that created them. If this is the choice you want to make, then look at the second link Maria has provided, it should provide you with what you are looking for.
Timothy Hickman
CADD Manager | CADD Department
timothy.hickman@colliersengineering.com
Main: 877 627 3772|
1000 Waterview Drive Suite 201 | Hamilton, New Jersey 08691
That article needs updating.
Look at the variable MS_OPENDWGAEC
I put an addendum on the article that shows the variable for CONNECT.
Hi Tim,
That is a step. But I have a lot of Reference files in DWG format from other disciplines and I cant change. I reference these files into MicroStation CE and it very slow when opening the major file?
Any idea
ok - so we are past the message then ?
and now the issue is that CONNECT is slow when opening due to the DWG references ?
Yes,I can provide you the DGN file and the DWG reference so You can look at it?
I did a quick speed comparison between MS CE update 7 and MS SS3 and there is a huge difference.
MS CE Updt 7: 2:18 min
MS Ss3: 0:30 min
This is only for 10 Reference files and I have about 150 DWG files as a reference needed, so it’s almost impossible to work with L