Hi,
How to get rid of "Incompatible version of AEC objects" It's slowing down our whole process when working wit MicroStation CE updt 7 and about 150 DWG drawings.
Please help
//Christiaan
Hi Christiaan,
ORD is for OPEN Roads Designer? if so, please post your thread in the dedicated forum https://communities.bentley.com/products/road___site_design/f/geopak-inroads-mx-openroads-forum#pi25841=1
otherwise review this thread https://communities.bentley.com/products/microstation/w/microstation__wiki/15786/incompatible-version-of-aec-objects
Maria
Thanks, using to much different software It has to be MS CE update 7
No one on this?
If you need to work with this version of MicroStation CONNECT, then any changes you make to the file will break the AEC objects and they will no longer work with the software that created them. If this is the choice you want to make, then look at the second link Maria has provided, it should provide you with what you are looking for.
Timothy Hickman
CADD Manager | CADD Department
timothy.hickman@colliersengineering.com
Main: 877 627 3772|
1000 Waterview Drive Suite 201 | Hamilton, New Jersey 08691
That article needs updating.
Look at the variable MS_OPENDWGAEC