Hello good MS community,
Here's a question taht I've been trying to figure out, or maybe know if you're able to do it.
When you place a filled shape, such as rectangle or circle, you always get it filled, even when you're selectiong tyhe Fill Type: None.
Is there a way to just make the rectangle or the circle without any solid filled pattern?
Regards
I've never seen that before. What version are you using?
MaryB
Power GeoPak 08.11.09.918Power InRoads 08.11.09.918OpenRoads Designer 2021 R2
so your closed shapes are all showing filled, even though the fill attribute is unchecked in the view attributes ?
Timothy Hickman
CADD Manager | CADD Department
timothy.hickman@colliersengineering.com
Main: 877 627 3772|
1000 Waterview Drive Suite 201 | Hamilton, New Jersey 08691
Your view presentation needs set to Wireframe
Connect r17 10.17.2.61 self-employed-Unpaid Beta tester for Bentley
that is where I was going with this. I agree with Bob and am guessing your display presentation is not set to wireframe, but at least wanted to make sure of the obvious first.
If you place a rectangle or circle they are shapes not lines so when the display style is set to anything other than wireframe (illustration or smooth) they will be rendered as a shape which have a color.
Fore reference see the image below:
In the above image the Display style is set to Illustration. The elements on the left are the circle and shape which will look filled. The Elements on the right are an arc and linestring.
Answer Verified By: Rafael Bombardiere Carvajal