i have a situation (as mentioned in a post below) where my border references have somehow moved many, many miles away from the correct location. Moving them back requires doing a Fit All, which shows me two tiny, tiny dots (my sheet and my border), then I have to window in several times to be able to see enough of my border to pick it up and move it.
This would be much easier of there was a command to Fit View to a specific reference. I've never heard of it, never thought about it until now, but Boy, that would be useful!!!
Is there such a command?
If not, I'm taking this over to Ideas.Thank you.MaryB
pick an X,Y, and/or Z co-ordinate somewhere within the area you want to relocate your wayward references. Go to the reference manager, high lite the references you want to relocate, & type the co-ordinates into the respective X-Y-Z fields & your references should jump back into your target area. That will get them close, then move to final location. I usually write my reference co-ordinates to a notepad file in case I need to reattach them in the future...
HTH...
Microstation SS3 08.11.09.714
ProStructures V8i SS8 v8.11.14.238