CR: Element Properties Reporting- Range High/Low of Multiple Selected Elements

Question

It would great if the Range fields reported the highest and lowest ranges instead of 'Varies'.

Callum Taylor · Answer

I know this thread is from a while ago, but I encountered a similar problem in wanting to visually display some terrain, however I have elements at 0 level which threw off MicroStation's gradient. Here in lies a bit of a round about solution I've found to your problem. 
 If you copy your data into a blank file and use the Thematic:Height display style, MicroStation will spit out the maximum and minimum values in the display settings options. This is by no means a particularly efficient (or quick) way to get this information and hopefully Bentley will provide an update to show the height variants of multiple elements. 
 
 Thanks, 
 Callum

Anders Svensson OMahony · Answer

Hi Dominic SEAH, 
 The Range Low / High does not show because you selected multiple elements. 
 If you go down the pick list and select a specific element then the Range Low / High will displayed. 
 
 Let me know how that works for you. 
 Kind regards, 
 Anders

Anders Svensson OMahony · Answer

Hi Mark and Dominic, 
 Please add any enhancement suggestions to the MicroStation - Ideas section of Bentley Communities. 
 https://communities.bentley.com/products/microstation/i/ 
 Alternatively you can private message me your Bentley Account Number and I will make an Enhancement Request on this. 
 Kind regards, 
 Anders

CR: Element Properties Reporting- Range High/Low of Multiple Selected Elements

Top Replies