I want to move a reference -500' on the xplane but I am a little confused how to get the Batch Process to pick it up. I have the move reference keyin but I am unsure how to tell it to move 500'. It is a basic question that I hope someone can answer for me. Thanks in advance!
do you want to move it in it the original xref model or on sheet files in several drawings?
If the later you may need to move the clipping boundary as well...
Lorys
Started msnt work 1990 - Retired Nov 2022 ( oh boy am I old )
But was long time user V8iss10 (8.11.09.919) dabbler CE update 16 (10.16.00.80)
MicroStation user since 1990 Melbourne Australia.click link to PM me
I am just moving 1 reference in 1 file.
I don't understand why you need a batch routine if you are only moving 1 reference in 1 file ?
Timothy Hickman
CADD Manager | CADD Department
timothy.hickman@colliersengineering.com
Main: 877 627 3772|
1000 Waterview Drive Suite 201 | Hamilton, New Jersey 08691
Yeah I know it seems redundant but the reason I want to use batch process is that for each project we have we have to setup a sheet which easily takes half an hour to do. And it is a bunch of simple commands that need to be made in a specific order, so reference one drawing, copy it in, change the color, copy another in, etc etc. So I wanted to simply automate the whole sheet since it is basic tasks that do not need human input.
ok - so this is more of a sheet generation routine - got it.
Thanks for the clarification.