Key-ins - make cursor default to Specifiy Distance Box

Here's a challenging task: when using key-ins or function key for "Copy Parallel" command, is there a way to make the cursor automatically go to the "Specify Distance" box (see attached image). Normally I have to use Tab key twice to get to this box. This is a potentially time saving step! 

I added “set item toolsettings distance=value” to key-in but you can only pre-set a number. For the project I work on, the number constantly change.  Thanks in advance!

Parents Reply
  • If you have the same distance over and over, then the distance box on the Copy Parallel tool works well. You said the distance keeps changing, so I suggested Accudraw.

    You can use Accudraw with the Copy Parallel tool - have you tried it? Click the copy parallel tool, pick your element and move your cursor in the direction you want to go. When your accudraw axis is highlighted, just type in the number for your distance. Accudraw even has a "sticky" value, so that you can continue copying parallel at that distance until you're finished.

    MaryB

    Power GeoPak 08.11.09.918
    Power InRoads 08.11.09.918
    OpenRoads Designer 2021 R2

        

Children