After measure angle, I want to do a rotation using the value measured.
In message centre, it says:
Angle = 3.927 followed by a lttle circle which is not an ascii character.
When I try to copy the angle value, it will not highlight - instead the whole line highlights.
So the high lighted text is
"Angle = 3.927~" where ~ represents the little circle which is not an ascii character.
In the rotate tool, when I paste the highlighted text, it does not recognise it because of
the junk characters, and it resets the rotate angle to zero.
So I have to edit it, to remove the junk characters.
Required behaviour is that a double click in the message bar line, on the angle value,
will select the value.
Double click to select a word is a GUI standard.
Can powerdraft be made to edit properly in Message Centre?
thanks
It would be helpful if you could provide the version of MicroStation being used, an example design file and possibly some screen captures to show your workflow and for us to check any elements in your design that might be of interest.
RegardsAndrew BellTechnical SupportBentley Systems