I often have to deal with longitudinal sections of pipe trenches where I have to enter the pipe axis heights and ground heights manually. Usually these have a 1:250 length scaled and 1:50 height scale. In order to work on them I have to scale them back to "normal" which also means that all texts are scaled to a fifth of their original width. When I open these in the text editor I can hardly see what I'm writing there. Is there a possibility to set the text editor to show normal width text? I haven't found one yet apart from reading the text in the status bar before and after editing. While typing I'm as blind as a mole.
Unscaled text:
Scaled text:
We have created Enhancement#969722 for this issue.
ok try this select the text and use the properties it will display the text as normal text in the display of the properties and if you click on it your sent to the text editor where you can retype it .. it will still be hard to read in text editor... but in properties you can read it clearly..
I don't he CE but in previous editions v8i we could choose not to have wordprocessor mode in text editor .. this is what you want to be able to imitate in CE .. anybody else know if thats possible and how .. maybe its a keyin that's not well known...
Lorys
Started msnt work 1990 - Retired Nov 2022 ( oh boy am I old )
But was long time user V8iss10 (8.11.09.919) dabbler CE update 16 (10.16.00.80)
MicroStation user since 1990 Melbourne Australia.click link to PM me
So closer to the AutoCAD way of "do it wrong then set it right", or "it ain't done right if it ain't done twice"?
For the most part I really like WYSIWYG, but common sense should still prevail. If we want to edit text, we need to be able to read what we are editing.
MaryB
Power GeoPak 08.11.09.918Power InRoads 08.11.09.918OpenRoads Designer 2021 R2
Hi,
There seems to be some miscommunication from our end.
The expected behavior is not currently supported in Connect. We are evaluating the issue and working with the Product Management to provide a suitable solution.
I apologize for the confusion.
Regards,
Ashrafali Jahagirdar
That is NO workaround at all, this is utter bull***t.
Our workflow makes this joke of a workaround simply impossible
It seems like your developer doesn't really WORK with Microstation, does he?It also seems like Bentley is working hard on getting us users go back to V8i or even other CAD software by just calling very BASIC tasks WAD. A kick in the bottom works as designed, too. Your developer might not like it, but that's the way it works.