Does anyone know how to enable the setting highlighted below - I cannot get this to show on my current configuration.
Could it be that you are talking about Update 10 as this operation was removed due to performance issues.
https://communities.bentley.com/products/microstation/w/microstation__wiki/39101/resolved-issues-in-microstation-connect-edition-update-10-10-10-00-23
https://communities.bentley.com/products/microstation/f/microstation-announcements-forum/157672/microstation-connect-edition-update-10
RegardsAndrew BellTechnical SupportBentley Systems
Yes Andrew - Update 10 - thankyou
Regards
Stephen
----------------------------------------------------------------------------------------
GHD - Global Software Manager - MicroStation
MicroStation CE Update 16.3 | ProjectWise CE 3.4
Jon
This is an interesting issue.... I also have a secret var, but I cannot tell you what it does, unless you have 007 clearance
James Bond
I could have told you but then I couldn't have let you live :) Bit daft really as the variable in question is described in the Connect help file if you know where to look. Nudge, Nudge, Wink, Wink.
Blog about this in here and some talk about this here.
I'm sure anybody can find the variable.
José
Thankyou All!
Hi Maria,
Unfortunately Model picker in backstage of Update 11 doesn't work for me.
I select a different model and when the file is open the original model is opened.
Can you please test this?
Thank you.
Hi Jose Pinho,
I can reproduce the issue too. I selected other model and it does not apply what i selected, reverts back to the default model. I follow up via SR with you to link the Defect 995803 with your SR.
The variable in U12 still don't work. Any news for U13?
Model picker in U13 is still broken.
Have you tested this for U14?
Looking at Defect # 995803 this has been approved for a future release but the version has not been allocated as yet.