snap to text functionality using nearest snap no longer available.
this has reduced the functionality of snapping to text.
Cheers
That's right, I noticed that, too. Text seems to be prioritised over other elements when selecting. Have to switch off levels more often than in V8i.
I've also noticed snap to text acts different than it did in v8i. Adjusting. I have trouble with accusnap always grabbing text elements in a "sticky" fashion, it's hard to get it to cycle thru to a nearby line or shape.
Connect r17 10.17.2.61 self-employed-Unpaid Beta tester for Bentley
It still snaps to center/center if you placed the text with that alignment. Otherwise you have to select Accudraw center pick.
But you're right, in V8i SS4 you could pick center/center no matter what text alignment.
Rousenator said:I prefer it set to 1 so when tracing linework im assured iam snapping to end points and not the mid point to avoid unnecessary vertices when dimensioning an element.
I agree, in such workflow it makes sense to set the divisor to 1.
Regards,
Jan
Bentley Accredited Developer: iTwin Platform - AssociateLabyrinth Technology | dev.notes() | cad.point
Thanks Jan,
Thanks for the MultiSnap tip its something ive never used.
I prefer it set to 1 so when tracing linework im assured iam snapping to end points and not the mid point to avoid unnecessary vertices when dimensioning an element.