Is there way to label welds with type and sizes and placement of welds?

What version (e.g. v10.x.y.z) of MicroStation or other product are you using?

How do you draw a weld?  A DGN example or screenshot will help us understand your requirement.

Power InRoads (SS4) 08.11.09.878

I am wanting to do the weld as shown below without having to purchase SteelCAD and placing each symbol individually.

Aaron Dent said:

Is there way to label welds with type and sizes and placement of welds?

Have you considered MicroStation tags?

Aaron Dent said:

I am wanting to do the weld as shown below without having to purchase SteelCAD and placing each symbol individually

You have to place each symbol, whether using SteelCAD or plain old MicroStation.

Place your symbol (cell) and label it using tags.  With tags, it's straightforward to create a report of welds.

Found a MDLapp called Detailer

https://communities.bentley.com/communities/other_communities/bentley_library/m/bentley_library_utilities/138923

Its very good isn't it.. I was a detailer in a previous life and used it  a lot!

There also was another tool called Steel  for Mstn same place you found detailer and it was great  for steel sections from standards and could also use in 3d to extrude section  to make beams etc....