How can you open the list of cell Libraries to choose a specific Library. the .cel not the .cfs file
dialog toolbox "RJBP_FontChanges", or dialog toolbox "RJBP_FontChanges" toggle
Check the following Wiki.
Dialog box IDs
WOW thank you so very much, I used it to set 2 specific cell added to tool box Just what I wanted. Thank you very much for the reply
I also have been looking for how to open a specific tool box via key-in command like these. Tool box name is RJBP_FontChanges. Can you suggest where that might be found ?
Version: MicroStation V8i SS 10
RJB Phillips III (Richard) Praise the Lord for His Mercy and grace in Christ Jesus
An additional benefit of defining MS_CELLLIST is that once done all your cell libraries will be listed under the file menu of the cell manager dialog.
The RC= command is still a legitimate way to load a cell library; nothing wrong with that. You may need to give it the full path, not just the library name. Try that and see if it works. Don't forget the "quotation marks" if there are spaces in your path.
If you know the cell name, as well as the cell library that contains it, you could even "chain" a command string to place that cell using a semicolon between commands. It would look something like:
RC=C:\Mycells\Common.cel;AC=StopSign
RC will load the cell libraryAC will place the named cellAR can be used if you want to place the cell as Relative
MaryB
Power GeoPak 08.11.09.918Power InRoads 08.11.09.918OpenRoads Designer 2021 R2