Cut_Slabs.dgn
What is the best method to cut a hole through multiple slabs?
Cut Solid only seems to want to do one at a time.
Tried creating a group of the slabs, cell etc.
Uploaded test file shows the required 'holes' in red.
I'm sure I used to be able to use element selection...
Using CEu8 on Win7
Thanks,
Paul.
In this instance you could place a fence ( Fence from Element ) and then use the Fence Delete with Fence Mode:Clip in the tool Settings.
See Also:
https://communities.bentley.com/products/microstation/w/microstation__wiki/17154/optimized-fence-clipping
Regards
Carl Myhill
Technical Support Engineer
Bentley Systems
Answer Verified By: Paul Walsh
Using the Fence Clip Delete method (now that I've learned about the optimized fence clipping setting), is there a way to limit depth of cut?
My example was of a front wall which in the actual model has a back wall behind it, I only want to cut the doors out of the front wall...
Any word from Bentley if they are going to fix these tools to work correctly in the future or just leave them a broken shell of their former self? I would consider this a major defect in Connect Edition give it's lost functionality. One of the Bentley higher ups once told me anything we're losing in Connect that was in V8i is a defect we're not supposed to be losing anything. Is Bentley still holding to this principle or have we given up on having a tool as good & better then V8i?