Dynamic sections depth of view

Hi all,

I have cut a section through a 3d model. I would like to set different depths of view along the cut line. is this possible?

Thanks

Parents
  • Yes. If you are using the Clip Volume tool then use the define clip plane option and it will allow you to set the depth. I believe by default the depth is infinite but you can right click on the blue green depth handle and choose toggle clipping.

    ~HTH

    John.

    yep

Reply
  • Yes. If you are using the Clip Volume tool then use the define clip plane option and it will allow you to set the depth. I believe by default the depth is infinite but you can right click on the blue green depth handle and choose toggle clipping.

    ~HTH

    John.

    yep

Children