Attaching a rotated model file into sheet

How can i attach a rotated model file into the title block with the same orientation?

I used rotate view and it should look like this:

But when i attach it to my title block using reference attach it shows the original orientation of the model instead of the rotated orientation that i would like to show.

Parents Reply
  • I havent   had to use this for a year or more but if I remember correctly...

     an old school solution, ( if you dont have the place northpoint in rotated view keyin see ask inga for both it and measure view rotation angle macro) unrotate view place a northpoint cell, rerotate the view ,,, get the angle of the cell via properties copy it)  go to ref manager in sheet view and edit rotation angle of the ref and paste the value from the north point  and view will rotate to make the same angle 

    you may need to copy paste the xy values into note pad before handas I think it moves after the rotation change

    Lorys

    Started msnt work 1990 - Retired  Nov 2022 ( oh boy am I old )

    But was long time user V8iss10 (8.11.09.919) dabbler CE  update 16 (10.16.00.80) 

    MicroStation user since 1990 Melbourne Australia.
    click link to PM me 

Children