When I open my Configuration : User - I am unable to change the default design file seed. The options are grayed out and there is an L after the word System
See Example:
Version: MicroStation V8i SS 10
RJB Phillips III (Richard) Praise the Lord for His Mercy and grace in Christ Jesus
Jon, this information did the trick
I was able to change:
Into the following:Now everytime I select new if my .ucf is loaded it goes to the one I had wanted. Thank you so very much for your help through the years
Thank you Jon, now in the configuration file>Seed File Location USER
c:\programdata\bentley\microstation v8i (selectseries)\workspace\projects\rjbp\seed\ I have this line, yet when I select New Microstation keeps opening the default design file seed and only looks looks seed2d.dgn. Even if I Select new and put in the path above it resets to the same think. it is Locked. Does it have to be locked ?
I also checked the MS_SEEDFILES USER and it also has the above path and added \rjbp_seed2d.dgn trying to get it to load my seed file. Any suggestions ?