Settings>Design File

This may be simple or hard, most markup I get I normally want to check what the Working Units are set on and  the Active Scale.

I know how to open and hit w for working or A twice to get to Active Angle or even S and get to snaps. But I was hoping to 

Key-in something and (Settings>Design File>Working Units. 

Parents
  • try MDL LOAD DGNSET ( FYI it came from the help menu)

    works but I cant find any  further settings to make it  work, but if I used the working units once msnt  remembers so next time I use MDL LOAD DGNSET the working units is already been selected and I can see the working units

    Lorys

    Started msnt work 1990 - Retired  Nov 2022 ( oh boy am I old )

    But was long time user V8iss10 (8.11.09.919) dabbler CE  update 16 (10.16.00.80) 

    MicroStation user since 1990 Melbourne Australia.
    click link to PM me 

Reply
  • try MDL LOAD DGNSET ( FYI it came from the help menu)

    works but I cant find any  further settings to make it  work, but if I used the working units once msnt  remembers so next time I use MDL LOAD DGNSET the working units is already been selected and I can see the working units

    Lorys

    Started msnt work 1990 - Retired  Nov 2022 ( oh boy am I old )

    But was long time user V8iss10 (8.11.09.919) dabbler CE  update 16 (10.16.00.80) 

    MicroStation user since 1990 Melbourne Australia.
    click link to PM me 

Children